The Hydronix 10" Sediment Filter Cartridge SDC-25-1010 is the same 10 Micron rated cartridge as the Liquatec SDF-25-1010 Sediment Filter. This 100% Polypropylene water filter cartridge is resistant to chemicals and reduces waterborne contaminants like silt, rust, sediment and sand. The four layers, outside-in flow and step-by-step 10 micron rating effectively retains particles while extending the life with a lower pressure drop. The graded density of the Hydronix SDC-25-1010 provides a higher dirt holding capacity over standard spun polypropylene and string wound cartridges.
The Hydronix 10 micron water filter is surfactant free, binder free, and adhesive free. It is widely used as pre-fitration for reverse osmosis systems and post-filtration for granular activated carbon (GAC) filters. In addition to replacing the Liquatec SDF-25-1010 filter cartridge, this Hydronix sediment water filter is an economical replacement filter for the Watts 10" Sediment Water Filter - 10 Micron. The operating temperature range for this 10 Micron Hydronix 10" Sediment Cartridge is 40 degrees to 145 degrees Fahrenheit. Do not use this sediment filter cartridge with microbiologically unsafe water without adequate disinfection.
Hydronix 10 Micron Sediment Filter specifications:
10 micron rating
100% Polypropylene media
Dimensions: 2 1/2" x 9 7/8"
Certified to NSF standard 42
Flow Rate: 2 gallons per minute
Replace cartridge every 6 months
Liquatec SDF-25-1010 Filter Replacement
Fits 10" standard water filter housings
Operating temperature range: 40 degrees to 145 degrees Fahrenheit
The Hydronix SDC-25-1010 Cartridge Filter is ideal for a wide range of residential, industrial, commercial and food service applications. Based on water quality and usage, change your Hydronix sediment water filter every 6 months for optimum performance of your system. Be sure to double check the size of your replacement filter cartridge before purchasing. This Hydronix 10 Micron Water Filter will fit filter housings requiring a standard 10" Sediment Filter Cartridge such as Pentek, American Plumber, US Filter, Culligan, Ametek and other standard housings.