The Hydronix 10" Sediment Filter Cartridge is the same cartridge as the Liquatec SDF-25-1001 Sediment Filter. This polypropylene filter, also known as Hydronix SDC-25-1001 is used as a pre-filtration for reverse osmosis systems and post-filtration for GAC filters. The Hydronix Sediment Water Filter Cartridge reduces extra fine dirt, sand, silt, rust and sediment found in your drinking water. It is also used in a wide range of applications such as residential, commercial, industrial and food service. In addition to replacing the Liquatec SDF-25-1001, this Hydronix filter also replaces the Pentek 155225-43 as well as the Watts FPMB1-978.
In addition to replacing the Liquatec SDF-25-1001 filter, this Hydronix sediment water filter is an economical replacement filter for the Watts 10" FPMB1-978 Sediment Water Filter - 1 Micron. Hydronix Sediment Filters are designed with true multi-stage depth filtration. It is constructed with graded density that traps particles for superior performance and dirt holding capacity over standard spun polypropylene and string wound cartridges.
Hydronix 10" Sediment cartridge filter specifications:
Nominal micron rating 1
Flow rate: 0.6 psi @ 5 gpm
Replace filter every 6 months
Dimensions: 2 1/2" x 9 7/8"
Multi-stage depth filtration
NSF/ANSI component tested
Temperature range: 40 degrees to 145 degrees Fahrenheit
The Hydronix SDC-25-1001 Filter can be used in standard size 10" water filter housings that use a standard 10" sediment cartridge: Pentek, Ametek, US Filter, American Plumber, Culligan and many other brands. Be sure to check the size of your filter cartridge before purchasing. For optimum performance of your filter housing, replace your Hydronix Sediment Filter every 6 months depending on usage. Do not use this filter cartridge with water that is microbiologically unsafe or of unknown quality without sufficient disinfection before or after the system.