The Hydronix 20" Sediment Filter Cartridge is a 1 micron economical replacement for the Liquatec SDF-25-2001 Sediment Filter. This sediment filter is made with 100% polypropylene that is resistant to chemicals and reduces waterborne contaminants like silt, sediment, rust and sand. The Hydronix 20" 1 Micron Sediment Filter is also known as part number SDC-25-2001. The graded density of the Hydronix 20" sediment Filter Cartridge provides a higher dirt holding capacity over standard spun polypropylene and string wound cartridges. In addition to replacing the Liquatec SDF-25-2001 filter cartridge, this Hydronix sediment water filter is an economical replacement filter for the Pentek 155304-43 and the Watts FPMB1-20 Sediment Water Filter.
The Hydronix 20" sediment water filter has four layers, outside-in flow and step-by-step 1 micron that effectively retain particles while extending the life with a lower pressure drop. This sediment filter cartridge is surfactant free, binder free and adhesive free. This sediment filter cartridge is widely used as pre-filtration for reverse osmosis systems and post-filtration for granular activated carbon (GAC) filters.
Hydronix 20" depth filter specifications:
1 micron rating
Dimensions: 2 1/2" x 20"
Flow rate: 0.6 psi @ 10 gpm
Replace filter every 6 months
Fits standard 20" filter housings
Operating temperature: 40 degrees to 145 degrees Fahrenheit
Replacement for Liquatec SDF-25-2001 Sediment Filter, Pentek 155304-43 and Watts FPMB1-20
The Hydronix 20" Sediment Cartridge Filter will fit filter housings requiring a standard 20" sediment filter cartridge such as American Plumber, Pentek, Ametek, Culligan, US Filter and other 20" standard housing systems. The operating temperature of this 20" sediment filter is 40 degrees to 145 degrees Fahrenheit. Do not use this Hydronix polypropylene filter cartridge with microbiologically unsafe water without adequate disinfection. Change your filter every 6 months for optimum performance, based on water quality and usage.