BevGuard BGE-4200S Replacement for Everpure H-300 H-104

BevGuard BGE-4200S Replacement for Everpure H-300 H-104
Item# bevguard-bge-4200s-h-300
$59.95
Availability: In Stock

Product Description

Introducing the innovative BevGuard® water filters that are designed specifically for the beverage and food service industry. They provide a high performance yet economical alternative to expensive Everpure* replacement filters.

Please note these filters may be longer than your current Everpure filter - the BevGuard 4200s is 24 inches long. While these filters will fit the Everpure system properly, it may not fit under the sink. We offer the BevGuard 3200S which is 17" long or carry other Omnipure options which are shorter and provide similar filtration. Contact us with any questions!

Replaces:

  • Everpure* 4C, H-54, H-104, H-300, MD-CN, PBS-400, S-100, S-101, SPA 4002

Features:

Reduces particulates and chlorine, improves taste and odor, and has Scale and Lime protection to decrease maintenance.

  • Economical alternative to expensive filter substitutes
  • Delivers clean, clear water that looks and tastes great
  • Will remove or reduce chlorine tastes and odor that may be present in your drinking water
  • Significantly reduces hardness build up due to minerals present in the water supply
  • Designed to provide up to twelve months of life or 20,000 gallons
  • Does not remove minerals which may be beneficial to health

Filtration Type:

Chlorine/Taste/Odor, Particulates, Scale Inhibitor

Cartridge Style:

Quick Change

Micron Rating:

1 micron

Dimensions (length):

21 1/2" (54.61cm) End to Tip

Operating Pressure:

25 psi - 125 psi (1.72 bar - 8.62 bar)

Flow Rate:

2.9 gpm (10.978 lpm)

Temperature Rating:

35 - 100° F (1.7 - 38° C)

Filter Life (capacity):

12 months or 20,000 Gallons (75,708L)

Case Quantity:

4 cartridges per case

This filter should not be used with water that is microbiologically unsafe or of unknown quality, without adequate disinfection before and/or after the filter.

BevGuard® filters have been tested by the manufacturer against ANSI/NSF Standard 42 for the reduction of chlorine, taste and odor.

Everpure® is a registered trademark of Everpure Inc., Northbrook, IL