2.5" x 10" Lead, Arsenic, Fluoride (Highly Selective) Removal Water Filter Cartridge - Resintech SIR-900 Resin

2.5" x 10" Lead, Arsenic, Fluoride (Highly Selective) Removal Water Filter Cartridge - Resintech SIR-900 Resin
Item# 2510-sir-900-resin
$35.95, 3 for $99.95, 6 for $192.95
Availability: In Stock

Product Description

The 2.5" x 10" Lead, Arsenic, Fluoride (Highly Selective) Removal Water Filter Cartridge - Resintech SIR-900 Resin is a replacement filter for standard 2.5" x 10" filter housings.

This 2.5" x 10" Lead, Arsenic, Fluoride (Highly Selective) Removal Water Filter Cartridge - Resintech SIR-900 Resin filter uses high grade filtration media for lead, arsenic, and fluoride removal. The effectiveness of this cartridge depends on contact time with the water - the slower the flow rate, the more effective the filter will be.

ResinTech SIR-900 is a granular aluminum oxide based adsorbent. SIR-900 is supplied as an active oxide media based on porous aluminum oxide. ResinTech SIR-900 is intended for removal of fluoride from water. It can also be used for the removal of arsenate, selenate, and lead from potable water. SIR-900 is supplied in the activated adsorbent form.

As an eco-friendly and wallet-friendly bonus, this filter is refillable and can be refilled with our bulk filtration media, which can be found on our website.

Filter features:

20 Micron Filtration
Dimensions: 2.5 inches x 10 inches
Made in the USA
Fits 10 inch water filter housings

Flow Rate:

.5 gpm/1.89 lpm

Operating Temperature:

33 - 100F (0.6C - 38C)

Min Operating Pressure:

30 psi - (207 kPa)

Max Operating Pressure:

100 psi - (689 kPa)

Life:

6 months or 500 gallons (1893 liters)

This filter should not be used with water that is microbiologically unsafe or of unknown quality, without adequate disinfection before and/or after the filter.

This filter has been tested by the manufacturer against ANSI/NSF Standard 42 for the reduction of chlorine taste and odor.