2" x 10" Iron and Manganese Removal for Well Water Inline Filter - Birm

2" x 10" Iron and Manganese Removal for Well Water Inline Filter - Birm
Item# 25x10-refillable-inline-filter-brimac-birm
$23.95, 3 for $65.95, 6 for $124.95, 12 for $234.95
Fitting Options: 
Availability: In Stock

Product Description

The 2" x 10" Iron and Manganese Removal for Well Water Water Filter Cartridge - Birm is a replacement filter for standard 2" x 10" filters.

This 2" x 10" Iron and Manganese Removal for Well Water Water Inline Filter - Birm filter uses high grade filtration media for iron and manganese filtration. This filter is especially designed for well water use.

As an eco-friendly and wallet-friendly bonus, this filter is refillable and can be refilled with our bulk filtration media, which can be found on our website.

***Due to regulations, Birm media cannot be shipped to California. For an alternative iron/sulfur/hydrogen sulfide removal filter, we recommend our KDF 85 filters.

Filter features:

20 Micron Filtration
Dimensions: 2 inches x 10 inches
Made in the USA
Removes iron and manganese
Fits directly into the water line
Perfect for pre-RO, post-RO, refrigerators, and more

Maximum Flow Rate:

.75 gpm (2.84 L/min.)

Operating Temperature:

33 - 100F (0.6C - 38C)

Min Operating Pressure:

30 psi - (207 kPa)

Max Operating Pressure:

100 psi - (689 kPa)

Estimated Life:

6 months or 500 gallons (1893 liters) depending on water quality and flow rate

This filter should not be used with water that is microbiologically unsafe or of unknown quality, without adequate disinfection before and/or after the filter.

This filter has been tested by the manufacturer against ANSI/NSF Standard 42 for the reduction of chlorine taste and odor.