The Highland Specialty Products HSP-MC-10-PS 10” Pleated Sediment Filter is the correct replacement for the following:
• 10" Standard Filter Housings
The Highland Specialty Products 10" Pleated Sediment Filter is an economical replacement for the Liquatec SPF-25-1020 filter. This sediment filter effectively reduces waterborne particles and contaminants as small as 20 micron. Resistant to chemicals and bacteria, this water filter has a high dirt holding capacity that extends the time between filter changes. In addition to replacing the Liquatec SPF-25-1020, this Highland Specialty Products pleated filter also replaces Pentek 255483-43 and Watts FM-20-975.
The Highland Specialty Products 10" sediment pleated filter is made from durable non-woven polyester and should not be used with water that is microbiologically unsafe or of unknown quality without adequate disinfection. The media around the polypropylene core is pleated for added strength and the ends of this sediment cartridge are immersed in a thermo setting vinyl plastisol. By embedding and sealing each end of the pleat, the three components are fused together to form a unified end cap and gasket.
Highland Specialty Products 10" Sediment Pleated Cartridge specifications:
• 20 micron filter
• High dirt holding capacity
• Flow rate: 1 psi @ 10 gpm
• Dimensions: 2 1/2" x 9 7/8"
• Media: Non-woven polyester
• Fits 10" standard filter housings
• Reduces waterborne particles and contaminants
• Maximum temperature capacity: 125 degrees Fahrenheit
• Replaces Liquatec SPF-25-1020, Pentek 255483-43, Watts FM-20-975
The flow rate of the Highland Specialty Products pleated filter is 10 gallons per minute. It is ideal for a variety of residential, industrial and commercial applications. This sediment filter is washable, reusable and durable. The temperature capacity ranges from 40 degrees to 125 degrees Fahrenheit (4.4 to 51.7 degrees Celsius). The Highland Specialty Products HSP-MC-20-PS pleated filter fits standard water filter housings requiring a 10" x 2 1/2" filter.